How to configure the thermal fan controller

This information applies to the:

Dual 120mm fan cooling kit with Programmable Thermal Controller.

This is a cooling kit included in specific configurations of outdoor kiosks like the Menta or Ikal.

Instructions:

Set Start Temp: Press "start button" once to put unit in Start programming mode and the start up temperature will blink. Use the right Up/Down buttons to set the temperature (note: it must be at least 2F/1C higher than the turn off temperature) press "start button" again to return to the real time readout.
Set Stop Temp: Press "stop button" once to put unit in Stop programming mode and the turn off temperature will blink, use the right Up/Down buttons to set the temperature (note: it must be at least 2F/1C lower than the turn on temperature) press the "stop button" again to return to the real time readout.
C/F or Up: Will change display to and from Fahrenheit and Celsius or will increase the temperature when in the Start or Stop programming mode.
Down: Will decrease the temperature when in the Start or Stop programming mode.
Display On/Off Switch: To turn display light off (device will still function) simply press and hold the C/F Button for 5 seconds. Repeat the process to turn display back on.

If you need further assistance, contact us.

Article ID: 262, Created: 9/26/2017 at 4:48 PM, Modified: 2/5/2019 at 3:07 PM